Our Blogs

Comparative Analysis: Thawing Frozen PVC, Copper, and PEX Pipes

Frozen Water Pipes Are Ticking Time Bombs

Freezing water naturally expands. When it solidifies, it creates pressure that your pipes may struggle to withstand. The result? Cracks, leaks, or full-on bursts that can flood your home. However, not all pipes react the same way when frozen, which is why professional frozen pipe thawing are essential to identify risks, prevent damage, and provide expert solutions.

Comparison of Pipe Materials and Their Reactions to Freezing

Pipe Type

Characteristics

Reaction to Freezing

PVC Pipes

Rigid and brittle

Likely to crack or break under ice pressure.

Copper Pipes

Durable but lacks flexibility

Freezes quickly and often bursts under pressure.

PEX Pipes

Flexible and handles expansion well

Less likely to burst but can be damaged by prolonged freezing.

Basics of Frozen Water Pipes

What Causes Water Pipes to Freeze?

Frozen pipes are a common problem in winter, especially during sudden dips in temperature. Without proper insulation, the water inside pipes can freeze, expand, and put intense pressure on the pipe walls.

Common Signs of Frozen Pipes

Frozen pipes often leave behind signs that shouldn’t be ignored.

  • No Water Flow
  • Frost on Pipes
  • Banging, whistling, or gurgling sounds
  • Bulging Pipes

How PVC, Copper, and PEX Pipes Respond to Being Frozen

PVC Pipes

PVC pipes don’t handle freezing temperatures well. They’re rigid, and when the water inside freezes, the pressure from expanding ice often causes cracks or breaks. This brittleness makes them one of the riskiest types of pipes in cold weather.

Copper Pipes

Copper pipes may seem tough, but their lack of flexibility is their downfall during a freeze. Ice expands quickly inside, and because Copper can’t flex, the pipe often bursts under pressure. 

PEX Pipes

PEX pipes, on the other hand, are flexible and handle freezing temperatures better. While frozen PEX water pipes are less likely to burst, they aren’t immune to problems. If the freeze lasts too long, even PEX can become damaged.

How to Thaw Frozen Water Pipes

Thawing Frozen PVC Pipes

If you want to thaw frozen PVC pipes, you need extra care to avoid cracks or breaks because they are brittle in freezing conditions.

  1. Turn off the water supply to prevent pressure from worsening any cracks.
  2. Apply gentle heat by wrapping warm towels around the frozen section or by using a hairdryer or heat gun.

 

Monitor progress and stop once water flow is restored to avoid overheating the material.

Thawing Frozen Copper Pipes

For thawing frozen copper water pipes, you need to be extra careful since they lack flexibility and might snap at any moment in frozen conditions.

  1. Find the frozen section. It’s often near exterior walls or uninsulated areas.
  2. Gradually apply heat using a heating pad or hairdryer to warm the pipe, starting near the faucet.
  3. Avoid overheating as it can warp or damage copper, so keep the temperature moderate and controlled.

Thawing Frozen PEX Pipes

PEX pipes are more forgiving but you still need to follow the steps below to make sure you thaw them safely.

  1. Warm the area using a space heater or warm water to raise the temperature around the pipe.
  2. Gently flex the pipe by carefully manipulating the frozen sections to help dislodge ice.
  3. Watch for damage and inspect for any signs of stress or long-term freezing damage once thawed.

Get Your Pipes Frozen to Flowing with Expert Insights from Big Apple Plumbing

Dealing with frozen pipes can feel overwhelming, but knowing how PVC, copper, and PEX pipes react makes all the difference.  

PVC pipes? They’re brittle and need careful, gentle thawing. Copper pipes? Tough but rigid; too much heat too quickly, and they can burst. And PEX pipes, while flexible, aren’t invincible. Just follow the steps above for each type, so you don’t accidentally cause more damage. If you’re unsure or need immediate help, emergency plumbers can provide expert assistance to thaw your pipes safely and prevent further issues.

Still wondering about frozen water pipes and what to do next? Reach out to Big Apple Plumbing website or visit our office at 8872 Meade St, Westminster, CO 80031. Call us at 720-900-1003 or email teambigappleplumbing@gmail.com. Frozen pipes? We’ll get them flowing again!

Quick and Reliable Repair of Emergency Leaks & Pipe Bursts. Call Big Apple Plumbing at (720) 900-1003 for your evaluation!

SCHEDULE SERVICE

TESTIMONIALS

wisetack logo
WE OFFER FINANCING
WE HAVE PARTNERED WITH WISETACK®

Recent Posts